FORELINE/ROTARY VANE FITTINGS & ACCESSORIES

One KF-25 Clamp and one KF-25 to KF-16 Flange Adapter

The adapter flange allows you to connect a KF-16 hose connection to a larger KF-25 intake port, as in upgrading an original foreline pump on a 5973/75 MSD to a larger RV3 foreline pump. In this case, you can use the existing co-seal & clamp for the smaller KF-16 end (connecting to the vacuum hose from the MSD), and you can use the KF-25 clamp and KF-25 co-seal (co-seal comes with the RV3 pump) to adapt the larger end to the RV3.

This adapter flange allows you to connect a KF-16 hose connection to a larger KF-25 intake port, as in upgrading an original foreline pump on a 5973/75 MSD to a larger RV3 foreline pump. In this case, you can use the existing co-seal & clamp for the smaller KF-16 end (connecting to the vacuum hose from the MSD), and you will need to purchase a KF-25 co-seal & KF-25 clamp to adapt the larger end to the RV3.

This clamp would be used to compress two KF-16 fittings together, with a co-seal between them, to create a vacuum seal.

This clamp would be used to compress two KF-25 fittings together, with a co-seal between them, to create a vacuum seal.

This co-seal would be used between two KF-16 fittings, and also requires a KF-16 clamp to compress them together to create a vacuum seal.

This co-seal would be used between two KF-25 fittings, and also requires a KF-25 clamp to compress them together to create a vacuum seal.

This KF-16 blank flange, otherwise called a "cap", would be used with a KF-16 co-seal and a KF-16 clamp to cap off an intake on a small foreline pump in order to test its anti-suckback valve.

This KF-25 blank flange, otherwise called a "cap", would be used with a KF-25 co-seal & KF-25 clamp to cap off an intake on a RV3, RV5, or E2M2 foreline pump in order to test its anti-suckback valve.

This short power cord adapts a standard North American 120 VAC plug to the IEC 60320 C-14 hooded style power plug that plugs into the Foreline Power socket on the back of MSDs.

Do not use this adapter when replacing a smaller pump with a larger one. Adapting a larger pump to be plugged into an MSD with an insufficient pump current rating may damage internal boards. This would be the case, for example, where an RV3 foreline pump replaced a smaller E2M1.5 pump. Be sure that the current rating supplied on the MSD is a match for the draw of any pump you adapt to it.

This mist filter captures oil vapor from rotary vane pumps. Port is KF-25; clamp and o-ring fittings are included.